If you have a 2018-20 Revel, and if you're *not* doing a GLSS from Canyon Adventure Vans, then you have unusually-shaped rear wheel wells in the garage area. I've searched a long time for a better way to use the space in these rear wheel wells, so I was very glad to finally find these Jeep storage bags that fit that space almost perfectly. (Note that there is a driver's side bag and a passenger's side bag, and they differ slightly from each other.)
In order to mount the driver's side bag, I considered using expansion nuts, but found these machine screws to have a very firm hold in the plastic, and simply capped them with large black washers, shown below.
I anchored the lower right corner (red circle) first, then applied 3 more screws & washers along the lower rear seam (blue line). Then I pulled the bag up so that it was vertically taut, and applied 4 more screws & washers along the top (green line).
At this point, the bag was very firmly attached to the van, and I stopped there. Looking into the bag without the velcro dividers installed, it looked like this:
I'm keeping it zippered shut, and will continue using my cargo net over this space for eventualities.
UPDATE: I realized that if I turn one of these bags on end, it provides a good fit in the remaining space in the wheel well. I've loaded it up with shoes & boots, and will give it a try on our next road trip. That awkwardly-shaped space is really starting to get utilized efficiently...
20-Oct-2020
