Daytripping vs. Roadtripping

The Covid pandemic has us using our van a bit differently for the past four months, and it's caused us to make some changes to how we organize our van. Rather than taking long road trips, overnighting with a lot of gear, we're mostly doing day trips, not taking much gear at all, and using the garage differently.

This is our normal roadtripping mode, with all the gear that we need for weeks at a time, organized and labeled in totes.

We don't need most of that gear (water replenishment, tools, many changes of footwear, campfire materials) when we're on a day trip to the beach or mountains, so I pulled almost all of that gear out of the van. Taking a cue from the fabulous Canyon Adventure Vans' GLSS, I replaced it with a couple of comfortable folding chairs and a camping table, giving us the daytripping configuration shown below. This gives us another 'room' to dine in, watch the whales out the back, whatever. 

However, if you're in a place where you need to use the insect screens, and you have the excellent Rolef screens on your van, then your view is blocked because the lower panel of the screen is opaque. Bummer, dude.

So I used one of the old-school Revel screens from model years 2018-19 to give us floor-to-ceiling views. This works great, and we love the screened-in porch vibe.

It was a little tricky to attach the Winnebago screen to the Rolef screen, and I had to make some stuff. Here's what I did...

I wasn't going to uninstall the Rolef screen just for day trips, so I needed a way to attach the Winnebago screen to it. Since the Winnebago screen only offered snaps for attachment, I made 'velcro snaps' to solve the problem.  I cut 1" x 1" squares of plastic by cannibalizing a Flexible Cutting Mat, then attached snaps to them. Then I attached some self-adhesive velcro squares, yielding what you see below.

Then I attached velcro squares to the Rolef screen, shown below. Works great, no bugs, floor-to-ceiling screened-in porch for the pandemic.

May-2020