We make all of our meals when we're on the road, so we tend to travel with a lot of food. As a result, our pantry is typically very full. However, Winnebago's first few units did not extend the shelf supports all the way to the top and bottom, meaning that owners have less flexibility in how they use the pantry. We needed to fix this.
Can't put shelves up here.
Can't put shelves down here.
I bought 4 new pieces of 48" shelf support, twice as long as what was previously installed.
Ran it all the way to the top.
All the way up and down.
Winnebago only shipped the Revel with 2 shelves, and that just wasn't enough. So I made 3 more shelves using aluminum stock and some plywood (didn't go hunting for matching formica).
I just used the existing shelves as a pattern, and it took about 2 hours to make these new ones. Required a jigsaw, hacksaw, drill, and screwdriver.
Also needed more shelf clips, easily purchased from my local big box store.
Locked and loaded!
1 comment:
I started this project today and found most of the screws installed by WB were stripped out.
I'm going to the next size screw and will countersink the bracket material for the larger flat head screw.
Post a Comment